Skip to content 
UltraVibe Ultrasound Sensors — Multi-Modal Condition Monitoring
UltraVibe combines ultrasound, vibration, and temperature sensing to monitor equipment health. It feeds real bearing-condition data into AI LubeMatrix and MatrixHub. TCM supplies, installs, and supports UltraVibe across Mississauga and the GTA.
79.6156° W
How UltraVibe Works
UltraVibe continuously monitors the equipment it’s mounted on and turns that raw signal into something actionable:
Continuous capture
The sensor tracks vibration, ultrasound, and surface temperature on the equipment around the clock.
Automatic baselining
It learns what normal operation looks like for that specific machine, rather than relying on a generic threshold.
Fault flagging
When readings drift from that learned baseline, UltraVibe flags it as a developing issue rather than waiting for an alarm to trip after the fact
Reporting
Fault data feeds directly into AI LubeMatrix for an automatic lubrication response, and into the MatrixHub dashboard so your team can see it
Because it calibrates to each machine automatically, UltraVibe can tell the difference between a running and a stopped state without any manual setup.
Key Features
Multi-modal sensing — ultrasound, vibration, and temperature monitored from a single device.
Automatic self-calibration — learns each machine’s own operating profile without manual configuration.
Distinguishes between sudden, acute faults and slower, progressive wear.
Catches both small-scale issues (like early bearing wear) and larger mechanical problems (like imbalance or misalignment).
Rugged construction built for continuous use in industrial environments.
Designed to retrofit onto existing equipment and mounting points.
Applications
UltraVibe is built for facilities that want earlier, more reliable warning of developing equipment problems. Common applications include:
Critical rotating assets such as motors, pumps, and fans.
Compressed air and gas systems, where early leak or fault detection avoids costly downtime.
Facilities with strict hygiene requirements, where equipment needs to be easy to keep clean.
Hard-to-reach machinery where frequent manual inspection isn’t practical.
Single-Sensor Monitoring vs. UltraVibe
A quick comparison of the two approaches:
Traditional Single-Sensor Monitoring
MEASUREMENT SCOPE
Typically one signal type — e.g. vibration only, or temperature only.
CALIBRATION
Often manual, machine-by-machine.
FAULT DETECTION
May catch obvious mechanical issues but miss early, subtle wear.
FAULT CLASSIFICATION
Often a single alarm threshold.
INTEGRATION
Standalone reading, often manually logged.
UltraVibe (Multi-Modal)
MEASUREMENT SCOPE
Ultrasound, vibration, and temperature — all from one device.
CALIBRATION
Automatic self-calibration from each machine’s own operating profile.
FAULT DETECTION
Catches both subtle bearing wear and larger mechanical faults.
FAULT CLASSIFICATION
Distinguishes sudden faults from slow, progressive wear.
INTEGRATION
Feeds directly into AI LubeMatrix and MatrixHub for an automated response.
TCM handles installation and setup of UltraVibe sensors as part of every purchase, and we can combine it with AI LubeMatrix installation or a vibration analysis inspection during the same site visit. Our team stays available afterward for support and questions as your monitoring program grows.
Why UltraVibe
Why Choose UltraVibe
One sensor instead of several — ultrasound, vibration, and temperature in a single device.
Earlier warning of developing bearing and lubrication issues than manual inspection alone.
Rugged construction built to hold up in demanding industrial environments.
Feeds directly into AI LubeMatrix and MatrixHub for automated, closed-loop response.
Sold, installed, and supported locally by TCM.
Part of the UltraVibe System
UltraVibe is one of three components in TCM’s LubMatrix line — feeding condition data into AI LubeMatrix for autonomous dosing and into the MatrixHub dashboard for facility-wide visibility. See the full LubMatrix category page for how the three work together.
Frequently Asked Questions
What does UltraVibe actually measure?
Ultrasound, vibration, and surface temperature — all from a single sensor, giving a fuller picture of equipment condition than any one reading alone.
Can UltraVibe retrofit onto equipment that already has sensors mounted?
Yes — it’s designed to work with existing mounting points, so adding it doesn’t usually mean reworking your equipment.
Is UltraVibe suitable for facilities with strict hygiene requirements?
Yes — its housing is designed to be easy to keep clean, which is why it’s a good fit for food, beverage, and pharmaceutical environments.
Does UltraVibe work on its own, or does it need AI LubeMatrix and MatrixHub?
UltraVibe can report fault data on its own, but it’s designed to feed directly into AI LubeMatrix and MatrixHub as part of the full LubMatrix system. We’ll recommend the right setup for your facility.
How is UltraVibe powered and connected?
It’s a low-maintenance, continuously powered unit designed for permanent installation — our team handles the connection details as part of setup.
How do we get pricing for our facility?
Pricing depends on how many sensors your facility needs — contact us for a free, no-obligation quote.
Get a Quote
Tell us about your equipment and current monitoring setup, and we’ll confirm whether UltraVibe is the right fit. Serving Mississauga, Ontario, Canada and the surrounding GTA, TCM is available for emergency diagnostic response — call any time, day or night.
